2/1 heat-shrink tubing without adhesive
Build your product in 5 steps :
Color
Status
- Actif
Pronto AU Part #
- 10829745
- 10829747
- 10829749
- 10829748
- 10829729
- 10829730
- 10829731
- 10829732
- 10829755
- 10829756
- 10829757
- 10829760
- 10829758
- 10829759
- 10829771
- 10829772
- 10829776
- 10829774
- 10829775
- 10829777
- 10829778
- 10829779
- 10829782
- 10829780
- 10829781
- 10829717
- 10829718
- 10829719
- 10829722
- 10829720
- 10829721
- 10829723
- 10829724
- 10829725
- 10829728
- 10829726
- 10829727
- 10829733
- 10829734
- 10829735
- 10829738
- 10829736
- 10829737
- 10829739
- 10829740
- 10829741
- 10829744
- 10829742
- 10829743
- 10829761
- 10829766
- 10829762
- 10829763
- 14219566
- 10829764
- 10829767
- 10829768
- 10829769
- 10829770
- 10829783
- 10829784
- 10829785
- 10829786
Wall Ø before shrinking (mm)
- 2
- 2.5
- 3.5
- 5
- 7
- 10
- 13
- 20
- 25
- 40
- 50
- 80
Wall Ø after shrinking (mm)
- 1
- 1.3
- 1.8
- 2.5
- 3.5
- 5
- 6.5
- 10
- 12.5
- 20
- 25
- 41
Thin wall, 2/1 shrinkage in length 1.2 meter.
Heat-shrink tubing in flexible flame retardant polyolefin (except clear).
Working temperature: -45 °C to +125 °C (clear is -45 °C to +105 °C).
Shrink temperature:120 °C (clear is 105 °C).
Dielectric strength (IEC 243): 15 kV/mm.
Tensile strength: 10.4 Mpa.
Rate voltage: 600 V.
Self-extinguishing in accordance with UL224 (except clear).
Thin wall 2/1 heat-shrink tubing without adhesive.
Application(s) :
For general and specific applications in the following areas: electrical insulation, marking and identification, protection (mechanical against corrosion), management and maintenance of wires.
Black 2/1 thin wall heat-shrink tubing without glue 2/1 mm 4 ft
Go straight to rexel.au