Biz’Gel sealing gel

BIZ 710 295
  • Europe
Specifications Tech

Dielectric strength: > 23 kV/mm.
Volume resistivity: > 2.1015 Ω/cm.
Voltage: from 0.6 to 1 kV.
Installation temperature: +0 °C to +40 °C.
Operating temperature after polymerisation: -60 °C to +200 °C.
Reticulation depending on the temperature:
≈ 15 min at 20 °C.
≈ 45 min at 10 °C.
≈ 190 min at 0 °C.

  • Net volume 1l
  • CE
Uses & advantages Info

Bi-component gel with high dielectric, thermal and sealing characteristics.
In two practical bottles, the required quantity of the two components should be mixed in a ratio 1:1.

Avantages :

Sets quick (according to temperature).
Easily re-accessible.
Non toxic.
No shelf-life.
Polymerisation even at low temperatures.

Application(s) :

Sealing and insulation of electrical connections.
Ideal for sealing junction boxes outdoors or in damp environments.
Suitable for sealing outdoor automated devices, intercoms, outdoor electrical and swimming pool installations, etc.

Methode of use and advice Info

Methode of use :

Pour the two components in a ratio 1:1.
Mix in the pouring pot for 30 seconds.
Pour the gel into the product to make it watertight.

Advice :

For optimum polymerisation, mix Biz'Gel at a temperature close to 23 °C.
Polymerisation may be longer if the product is conditioned at lower temperatures.

IP68 rating only if used in a suitable box.

BIZ'GEL sealing gel 1 l
Buy online

Go straight to rexel.au